移动联通电信手机移动联通电信手机

Detail Inquiry

6. Reduce dust (avoid foundry, welding, sheet metal workshop, etc.)

7. Avoid water leakage and immersion

Main technical parameters

Machine model:VMC855	Unit	Specification
Table size	mm	1000x550
X/Y/Z axis travel	mm	800/550/550
Distance from spindle end face to table	mm	120-670
Distance from spindle center to column	mm	590
Maximum load of the table	Kg	600
TableT-slot	mm	5-18x90
X/Y/Z axis rapid feed	m/min	36/36/32
X/Y/Z guide rail width specification	mm	RGH35/45/45 roller linear guide
X/Y/Z screw specification	mm	φ4016
Positioning accuracy	mm	±0.008
Repeat positioning accuracy	mm	±0.006 /300
Minimum positioning unit	mm	±0.001
Four-axis accuracy	mm	≤0.01
Maximum spindle speed	rpm	8000 (spindle ring spray)
Spindle taper	mm	BT40-150
Disc mechanical arm tool magazine	pcs	24T
Controller system	/	GSK25i
X/Y/Z axis motor power	Nm	15/15/22
Spindle motor power	Kw	11
Machine weight approximately	Kg	5000
Overall dimensions	mm	2600x2400x2650

# The machine's overall dimensions may vary due to configuration changes without further notice

ConfigurationList

No	Item name	Place of origin	Manufacturer
1	Main structure cast iron (bed)	Yunnan	Casting
2	CNC controller	China	GSK25i system
3	Spindle drive motor	China	GSK25i system
4	Three-axis drive motor	China	GSK25i system
5	Integrated spindle	Taiwan	Shuge/Aibike
6	Spindle tool cylinder	Taiwan	Iron凝
7	X, Y, Z three-axis bearings	Taiwan	TPI
8	X, Y, Z three-axis linear guides	Taiwan	SHAC
9	X, Y, Z ball screws	Taiwan	SHAC
10	Three-axis couplings	Taiwan	S+P
11	Centralized automatic lubrication system	Taiwan	Baoyu
12	Air source filtration and purification device	Taiwan	AirTAc air curtain protection
13	Cooling device	China	Weisen
14	Operation panel and handwheel	China	GSK25i system
15	Electrical appliances, overload protectors	China	Delixi
16	Mechanical arm tool magazine	Taiwan	Note: Adjust the brand according to supply conditions, but not lower than the original brand's quality level standards

Standard equipment configuration

Configuration content

NO	Configuration content	NO	Cutting cooling system
1	Internal cleaning device: chip blowing gun	13	Automatic lubrication system
2	Manual pulse generator: handwheel	14	Cutting blowing device
3	External network transmission interface	15	Spindle and servo overload system protection
4	Three-axis telescopic protective cover (full cover inner plate	16	gold) Three-color alarm light
5	External protection advanced baked paint sheet metal	17	Horizontal adjustment bolts and pads
6	Rigid tapping	18	Electrical box heat exchanger
7	Accuracy inspection certificate	19	Three-axis screw pre-tensioning device
8	Electrical instruction manual	20	Program storage
9	User manual	21	Spindle ring water spray
10	Program operation manual	22	Reserved for adding four-axis interface
11	Front chip removal	23	Internal work light
12	Machine packing list

Serial number

Name	Specification	Quantity	CNC system operation manual
1	Guangshu	25i system1 set	Latin
2	1 piece		Wedge
3	8 sets		Adjustment bolts
4	8 sets		User manual
5	1 book		Certificate of conformity
6	1 book		1本

			* 			Name						： 
					 
Plsease input value

						Company name						： 
					 
						Telephone number						： 
					 
			* 			E-mail						： 
					 
Error E-mail format

						Address						： 
					 
			* 			Content						： 
					 
Plsease input value

			* 			Name						： 
					 
Plsease input value

						Company name						： 
					 
						Telephone number						： 
					 
			* 			E-mail						： 
					 
Error E-mail format

						Address						： 
					 
			* 			Content						： 
					 
Plsease input value